Site Feedback THIS SECTION IS FOR SITE RELATED ISSUES ONLY!! NO TECHNICAL QUESTIONS OR ANYTHING RELATED TO FIXING AN AUTOMOBILE

1997 chevy k2500 5.7

Old Nov 20, 2021 | 8:28 PM
  #1  
Woodthomas's Avatar
Thread Starter
CF Beginner
 
Joined: Dec 2020
Posts: 2
Likes: 0
Default 1997 chevy k2500 5.7

My truck died on me going down road I have it towed to oreillys and they put a code reader on it and it showed mass air flow sensor and then it started so I went a head and replaced it. The next day it did the same thing dies while driving. And I haven't got it to start ever since. I have put new spark plugs and wires in it. I replaced fuel pump, has new battery, replaced starter, put new ignition coil, and still nothing. It's not even throwing a code. Can anyone help me.
Reply
Old Nov 21, 2021 | 7:28 AM
  #2  
oldchevy's Avatar
CF Monarch
10 Year Member
Liked
 
Joined: Apr 2012
Posts: 6,233
Likes: 440
From: Miami, FL.
Default

First determine if you are getting spark, so that you know if it is a fuel or ignition problem. You can spray gas into the throttle body to see if runs for a few seconds. I have also seen a crank sensor be bad and not throw a code. Cam sensor also.
Reply
Old Nov 21, 2021 | 9:00 AM
  #3  
Rednucleus's Avatar
CF Addict
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2014
Posts: 2,346
Likes: 311
From: Marysville, WA
Default

My 93 Sub has done this 3 times over the years; has always been the ICM - I could run it putting fuel in the throttle body - had spark but no fuel
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Steven Carter
New Member Welcome Area
1
Nov 20, 2019 9:36 PM
Steve1979
New Member Welcome Area
0
Mar 8, 2018 10:55 PM
Lucius Cross
New Member Welcome Area
1
Nov 27, 2016 9:37 PM
Dbarcus1221
North Eastern
1
Nov 1, 2016 3:33 PM
blueharleymn
New Member Welcome Area
1
Dec 31, 2014 5:11 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 6:04 AM.